10Scene Window and 10Scene Wall Plates
10Scene buttons create simple, quick architectural control.
10Scene buttons are available as 10 button wall plates, 10 buttons on the front panel of the QuickQ Rack, or the 10Scene app for iOS, Android and Microsoft Windows.
To connect 10Scene wall plates to a QuickQ console use a 10Scene Gateway (up to 20 per Gateway), 10Scene wall plates can be connected directly to the QuickQ Rack (up to 40).
A QuickQ system can support up to 40 10Scene wall plates connected via either direct sockets on the rack or across Gateways. A maximum of 10 Gateways can be connected to a QuickQ system.
Access the 10Scene Window from the main menu.
The 10Scene Window has four views, Panel view, Contact Events, Gateways and the 10Scene settings.
10Scene buttons can be used to toggle on and off either the first 10 execute buttons on the execute page, the 10 playbacks or using Zones to activate execute buttons in Zones.
Settings
QuickQ offers four operation modes for 10Scene wall plates:
-
10Scene toggles playbacks 1-10 on and off, in this mode 10Scene wall plates will toggle on and off playbacks recorded on right-hand side of the console, these can be either a cue or a chase.
-
10Scene toggles executes 1-10 on and off, in this mode 10Scene wall plates will toggle on and off the first 10 execute cues recorded in the Execute Window.
-
10Scene controls execute in zones set by groups
-
10Scene controls executes in rows, in this mode 10Scene wall plates will toggle executes in zones defined by rows. The execute grid must be 10 cells wide, for example: 10x1, 10x6 or 10x10.
QuickQ supports up to 10 Zones.
Choose the option you want in the 10Scene Window Settings tab.
Panel
The 10Scene Panel window emulates a 10Scene wall plate in any of the 10 zones, or control all of them.
|
The 10Scene Panel view can control any of the 10 Zones that QuickQ supports, using the drop down at the top right of the panel |
Contact Events
Each of the 10Scene connectors on the QuickQ Rack or Gateway has a contact pin that can be configured to trigger an Execute or Playback, or can join two zones together so that the Wall Panels for both zones control the lights in multiple zones.
Add a contact event in the Contact Events Window using the +.
Select the socket number (10Scene ports on Gateways are always sockets 1 & 2).
Contact events can action their target when the contact turns On, Off, On and Off or Off and On.
Set Target is used to select the execute or playback item to action when the contact event is received, contact events action can also be used to join zones.
|
QuickQ supports 4 unique contact inputs per system. Gateways are always socket 1 and 2. |
Gateways
SnakeSys Gateway interfaces are used to connect 10Scene wall plates to a QuickQ Console or additional 10Scene wall plates to the QuickQ Rack. Each Gateway has 2 10Scene sockets to connect up to 20 10Scene wall plates (10 per socket) and 2 contacts.
The Gateways tab displays Gateways that are connected to the system and allows for configuration of these interfaces.
The Gateway name, IP address and subnet mask can be configured from the Gateways tab using the Action menu.
The IP address of the console can be set in the Wired Network Settings Window.
|
10Scene Gateways must be enabled in for Gateways to work. |